Atex Global atexconduit.co.uk

Contact Sales

please contact our sales team for info, prices and availablity.
+44 (0)800 7565305
Office hours 8am - 8pm, mon - fri sales@atexglobal.com

Atex TelephonesAtex Telephones

Intrinsically Safe Desk / Wall Telephones


Contact Sales

0800 7565305 sales@atexglobal.com
 
     
 

Atex Swivel Adaptors & Reducers (TA-U/TP-U Series)

Redapt 90° and Inline Series of Adaptors and Reducers provide a method of matching electrical threadforms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained with the addition of the new “SWIVEL FEATURE”.

The 90° version (type TP-U) of the Swivel Adaptor has been designed to allow a full 360° choice of cable entry/exit position.

This enables the installer to run the cable in any direction which greatly improves the ease of installation in confined or difficult situations. The cable entry/exit can be aligned without the over under torque compromise imposed by the direction of the cable.

The Inline version (type TA-U) of the Swivel Adaptor allows independent connection at both ends.

Adaptors are used where the thread size of the cable gland or connection device is larger than, or of an equivalent size, to the entry thread of the enclosure. Reducers are used where the thread size of the cable gland or entry device is smaller than the entry thread of the enclosure.

Redapt Adaptors & Reducers are designed for hazardous area applications and are certified to protection concepts Exd  “Flameproof” and Exe “Increased Safety” for use in Zone 1 and Zone 2 applications.

Approved to the latest international standards, adaptors and reducers can be supplied with ATEX (CENELEC), and IECEx hazardous area certificates.

NOTE: Swivel Adaptors are now also GOST certified

Swivel Adaptors TAU  TPU
Protection Method Exd Flameproof & Exe Increased Safety
Ingress Protection Maintained
IP66, CSA Enclosure Type
Impact Resistance
20 Nm
Ambient Temperature Range
-50°C to 180°C
Threadforms ISO Metric, NPT, PG, NPS, BSPP, BSPT, ET.
Others on application
Materials Brass CZ121, 316 Stainless Steel, Aluminium 6082, Mild Steel EN1A
O-Ring Material Silicone
Plating Nickel, Electroless Nickel, Zinc, others on application
Standards Approved to
IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1
ATEX Approval SIRA10ATEX1275U
IECEx Approval

IECEx SIR 12.0016X (Inline) 

IECEx SIR 10.0123U (90 Degree)


HOW TO ORDER WITH PART NUMBERS
Use the codes below to create part numbers for each product before contacting us to place an order.
example: TP-U-1-1-06-07
  TYPE CERTIFICATION MATERIAL PLATING MALE THREAD FEMALE THREAD
  Digit 1 & 2 Digit 3 Digit 4 Digit 5 Digit 6& 7 Digit 8 & 9
90° PART No. TP U ? ? ? ?
INLINE PART No. TA U ? ? ? ?
Material Codes Digit 4
1 - Brass
3 - S/Steel
5 - Aluminium

Plating Codes
Digit 5
1 - Nickel
2 - Zinc
• Others on application
Thread Type Codes
Male = Digit 6& 7 (eg: M32 = 06), Female = Digit 8 & 9 (eg: M40 = 07)
Crouse-Hinds Adaptors