Atex Global atexconduit.co.uk

Contact Sales

please contact our sales team for info, prices and availablity.
+44 (0)800 7565305
Office hours 8am - 8pm, mon - fri sales@atexglobal.com

Atex TelephonesAtex Telephones

Intrinsically Safe Desk / Wall Telephones


Contact Sales

0800 7565305 sales@atexglobal.com
 
     
 

Type A & B Stopping Plug (PA-D/PB-D Series)

Redapt PA-D and PB-D Series of Stopping Plugs provide a method of blanking off unused entries in hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained.

The PA-D Series or Type A Stopping Plugs are designed to be installed from the outside of an enclosure and tightened with an appropriate hex (Allen) key. When installed they fall flush with the outside of the enclosure wall.

The PB-D Series or Type B Stopping Plugs are designed to be installed from the outside of an enclosure. The hexagon recess is located on the inside and the plug is tightened with an appropriate hex (Allen) key. Due to this feature, they are sometimes referred to as tamper-proof stopping plugs. When installed they fall flush with the outside of the enclosure wall.

Redapt Type A and Type B Stopping Plugs are designed for hazardous area applications and are certified to protection concept Exd “Flameproof” for use in Zone 1 and Zone 2 applications.

Approved to the latest international standards, Type A and B stopping plugs can be supplied with ATEX (CENELEC), IECEx and GOST-R hazardous area certificates.

In addition CSA approval certificates can be supplied to cover use in North American and Canadian Class I Division 1 and Class I Zone 1 applications.

PAD  PBD plugs
Protection Method
Exd – Flameproof
Ingress Protection Maintained
IP64
Impact Resistance
7Nm
Ambient Temperature Range
-50°C to 100°C
Materials
Brass CZ121, 316 Stainless Steel, Aluminium 6082,
Mild Steel EN1A

Plating

Nickel, Electroless Nickel, Zinc, others on application
O-Ring Materials
None
Standards Approved To
IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1
ATEX Approval
SIRA99ATEX1113X
IECEx Approval
IECEx SIR 12.0016X
GOST-R Approval
RU ?-GB.??06.?00106 – Russian
RU ?-GB.??06.?00106 – English
RU ?-GB.??06.?00106 Annex document – English
CSA Approval
1248014 (LR 106084-2)

HOW TO ORDER WITH PART NUMBERS
Use the codes below to create part numbers for each product before contacting us to place an order. example: PA-D-1-1-06-00
  TYPE CERTIFICATION MATERIAL PLATING MALE THREAD FEMALE THREAD
  Digit 1 & 2 Digit 3 Digit 4 Digit 5 Digit 6& 7 Digit 8 & 9
PRODUCT PART No. PA D ? ? ? 00
PRODUCT PART No. PB D ? ? ? 00
Material Codes
Digit 4
1 - Brass CZ121
2 - Mild Steel
3 - Stainless Steel
5 - Aluminium

Plating Codes

Digit 5

1 - Nickel
2 - Zinc
• Others on application
Thread Type Codes
Male = Digit 6& 7 (eg: M32 = 06), Female = Digit 8 & 9 (eg: NIL = 00)
Crouse-Hinds Adaptors